NEC Univerge SV8100 Features And Specifications Manual page 414

Issue 1.0
Program
Program Name
Number
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
22-07-01 DIL Assignment
22-08-01 DIL/IRG No Answer Destination
2 - 390
Description/Comments
Select whether an extension should
display the reason a call is being
transferred to their extension (Call
Forward Busy, Call Forward No
Answer, DND).
A DIL that rings its programmed
destination longer than this time
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
Assign each DIL Service Type 4.
Make an entry for each Night Service
mode.
Assign the extensions that should
receive the overflow to the ring group
programmed in Program 22-08. Set
the ringing in Program 22-06.
Set the destination extension
number for each DIL – for each Night
Service mode. The destination can
be an extension port, virtual
extension number, or Department
Group pilot number (as assigned in
Program 11-07-01).
For each DIL with delayed ringing,
enter the DIL No Answer Ring
Group. An unanswered DIL rings this
group after the DIL No Answer Time.
Make an entry for each Night Service
mode.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 0 seconds)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Extension Number
(maximum eight digits)
(default not assigned)
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
Direct Inward Line (DIL)
Level
2 3