NEC Univerge SV8100 Features And Specifications Manual page 269

UNIVERGE SV8100
Program
Program Name
Number
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-09-08 Class of Service Options
(Incoming Call Service) – Calling
Party Information
SV8100 Features and Specifications Manual
Description/Comments
Used to Enable or Disable the
ability to make voice over to a busy
virtual extension for each Class of
Service.
Turns Off or On the extension ability
to receive a second call from a DID,
DISA, DIL, or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a line or Call Appearance
(CAP) Keys available for the
second call and a previous call
is ringing the extension but
has not been answered, the
second caller hears busy
regardless of this program
setting.
Turns Off (0) or On (1) the Caller ID
display at an extension.
Define whether an extension
displays the Caller Sub-Address.
Determine whether or not the
CHECK LIST message is displayed
to indicate a missed call.
Turns Off or On an extension ability
to enable Handsfree Answerback or
Forced Intercom Ringing for their
incoming Intercom calls.
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminals LCD while
the telephone is ringing.
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Turns Off or On and extension user
ability to display calling party
information on CCIS calls.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
01~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 245