NEC Univerge SV8100 Features And Specifications Manual page 970

Issue 1.0
Program
Program Name
Number
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-19 Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
20-08-20 Class of Service Options
(Outgoing Call Service) – Hot Key
Pad
20-08-21 Class of Service Options
(Outgoing Call Service) –
Automatic Trunk Seizing by
Pressing Speaker Key
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
20-09-01 Class of Service Options
(Incoming Call Service) – Second
Call for DID/DISA/DIL/E&M
Override
2 - 946
Description/Comments
Turns Off (0) or On (1) a user Class
of Service from automatically
blocking outgoing Caller ID
information when a call is placed. If
block is enabled, the system
automatically inserts the Caller ID
block code 1831 (defined in
Program 14-01-21) before the user
dialed digits (this requires Program
14-02-10 to be enabled). If block is
disabled, the system outdials the
call just as it was dialed by the user.
Turns Off or On an extension ability
to display the name and number of
the extension that dialed 911.
(US Only)
Turns Off or On an extension ability
to override the trunk access map
programming for outgoing calls.
Turns Off or On an extensions'
ability to activate hotline or
ringdown when pressing the
Speaker key.
Turns On (1) or Off (0) the ability of
an extension to make a call by just
dialing the number without first
going off hook.
Enable or Disable the ability of an
extension to automatically access
Trunk Route when going off hook
via the Speaker key.
Enable or Disable the ability of an
extension to make Voice Over to
Busy Virtual Extension.
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
SLT Adapter
Level
1 2 3