NEC Univerge SV8100 Features And Specifications Manual page 609

UNIVERGE SV8100
Toll Restriction (When Checked In)
Control a guest's long distance dialing automatically when they check in. Use this feature to set up two
different Toll Restriction modes. The first mode is for you and your staff when the room is checked out.
The second mode is for your guests when they check in. You may want to restrict the outside numbers
guests can dial, but allow your staff to call vendors and suppliers.
Room Status
Your phone and DSS Console can set and monitor the status of all your guest rooms: Checked In,
Checked Out, Maid Required and Maid in Room. Maximize room usage by coordinating your cleaning
staff and reservation desk. For example, you can dial simple codes to set a room status.
Room Status Printouts
The Room Status Printouts give you a concise overview of the status of all your guest rooms at a glance.
The printouts provide up to the minute reports showing Room Status, Room Call Restriction, Do Not
Disturb, Message Waiting and Wake Up Calls. If your cleaning staff needs to know which rooms to clean
up, for example, just print out the report showing Room Status. This printout requires a connection to the
system using either a serial CTA adapter, USB CTU adapter or IP post on the CPU. Only DTH telephones
are supported with CTA/CTU on SV8100.
DSS Console Monitoring
Your DSS Console provides room monitoring capabilities. You can see at a glance which rooms have
Wake Up Calls set or messages waiting. In addition, you can still use your console for business mode
features.
Do Not Disturb
A guest can activate DND anytime they need privacy (for example, if they need to work uninterrupted).
Do Not Disturb (DND) blocks the room telephone incoming calls and Paging announcements. This can
be set from the room phone or attendant phone.
Flexible Numbering Plan
To simplify dialing guests and services in your facility, customize your system to have room numbers
match phone extension numbers. For example, if the rooms on the first floor are numbered 100~120, the
corresponding room extensions should also be 100~120.
Conditions
Function codes 92 and 93 can only be assigned to a DSS Console that is in Hotel Mode.
These features do not work when programmed on multiline telephone line keys or on a DSS
Console in Business mode.
When multiple DSS Consoles are used for Hotel/Motel function keys must be assigned to
each DSS console for Wake Up Call Indication and Room Status Indication.
The Message Waiting status of a room cannot be seen when the console is in Wake Up Call
or Room Status mode.
SV8100 Features and Specifications Manual
Issue 1.0
2 - 585