NEC Univerge SV8100 Features And Specifications Manual page 951

UNIVERGE SV8100
Program
Program Name
Number
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
22-03-01 Trunk Ring Tone Range
1 = High
2 = Mid Range
3 = Low
4 = Ring Tone 1
1 = High
2 = Mid Range
3 = Low
4 = Ring Tone 1
Operation
To change your extension incoming ring tones:
1. Press Speaker.
2. Dial 720.
3. Dial 1 to set Intercom ring; 2 to set trunk ring.
4. Dial code for the desired ring pattern (1~8).
5. Press Speaker to hang up.
SV8100 Features and Specifications Manual
Description/Comments
When two or more virtual
extensions are set on a function key
on the telephone, and the tone
pattern by which the sound of each
extension differs, the priority of ring
sound is set up.
Select the ring tone range for the
trunk. The trunk uses a ring tone in
the range selected when it rings an
extension. Four ring tones are
available.
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
Assigned Data
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
Order 1 Pattern 0 =
Pattern 1 (default)
Order 2 Pattern 1 =
Pattern 2 (default)
Order 3 Pattern 2 =
Pattern 3 (default)
Order 4 Pattern 3 =
Pattern 4 (default)
0~8
(Ring Tone Pattern
1~4)
(Melody 1~ Melody 5)
(default = 0)
Issue 1.0
Level
1 2 3
2 - 927