NEC Univerge SV8100 Features And Specifications Manual page 647

UNIVERGE SV8100
IP Extension Numbering:
Program
Program Name
Number
11-02-01 Extension Numbering
SIP Extension Codec Information:
Program
Program Name
Number
84-19-01 SIP Extension CODEC
Information Basic Setup – G.711
Audio Frame Number
84-19-02 SIP Extension CODEC
Information Basic Setup – G.711
Voice Activity Detection Mode
84-19-03 SIP Extension CODEC
Information Basic Setup – G.711
Type
84-19-04 SIP Extension CODEC
Information Basic Setup – G.711
Jitter Buffer (min)
84-19-05 SIP Extension CODEC
Information Basic Setup – G.711
Jitter Buffer (average)
84-19-06 SIP Extension CODEC
Information Basic Setup – G.711
Jitter Buffer (max)
84-19-07 SIP Extension CODEC
Information Basic Setup –
Number of G.729 Audio Frames
SV8100 Features and Specifications Manual
Description/Comments
Use this program to define the IP
Phone extension number.
This designated extension is
used to register your IP Phone
and is programmed IP Phone
programming. Refer to the
Installation Instructions for
Installation Instructions for
term
ITH-4D/8D/16D-2/3 D
Terminals and the IP-R( )
(IPK) Adapters.
Description/Comments
Use this program to define the G.71
audio Frame Size.
Use this program to Enable or
Disable Voice Activity Detection for
G.711.
Use this program to define the
G.711 Type – Mu-law is
recommended when in USA.
Use this program to define G.711
Jitter Buffer minimum accepted
value – values are set in ms.
Use this program to define G.711
Jitter Buffer average accepted
value – values are set in ms.
Use this program to define G.711
Jitter Buffer maximum accepted
value – values are set in ms.
Use this program to define the
G.729 audio Frame Size.
Assigned Data
Up to eight digits
1 101
2 102
3 103
~ ~
99 199
100 3101
~ ~
IPK
512 3513
Assigned Data
1~4
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
(default = 2)
0 = Disabled
1 = Enabled
(default = 0)
0 = A-law
1 = u-law
(default = 0)
0~160 ms
(default = 20 ms)
0~160 ms
(default = 40 ms)
0~160 ms
(default = 80 ms)
1~6
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
5 = 50 ms
6 = 60 ms
(default = 2)
Issue 1.0
Level
1 2 3
Level
1 2 3
2 - 623