NEC Univerge SV8100 Features And Specifications Manual page 672

Issue 1.0
Program
Program Name
Number
10-18-01 H.323 Alias Address Setup –
Alias Address
10-18-02 H.323 Alias Address Setup –
Alias Address Type
10-23-01 SIP System Interconnection
Setup – System Interconnection
10-23-02 SIP System Interconnection
Setup – IP Address
10-23-04 SIP System Interconnection
Setup – Dial Number
10-40-01 IP Trunk Availability – IP Trunk
Availability
10-40-02 IP Trunk Availability – Number of
Ports
14-02-01 Analog Trunk Data Setup –
Signaling Type (DP/DTMF)
14-05-01 Trunk Group – Trunk Group
Number
14-06-01 Trunk Group Routing – Priority
Order Number
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
2 - 648
Description/Comments
Set the telephone number (Alias
Address) to external gatekeeper.
Set the Alias Address Type to
external gatekeeper.
Used to determine if the system is
interconnected to another system.
Define the IP Address for the SIS
System Interconnection.
Define the Dial Number for the SIP
System.
Use to Enable or Disable IP Trunks.
Define the number of IP Trunks
when enabled.
At default, Program 14-02-01 is set
to 2 (DTMF). For the IP trunks this
must be set for Dial Pulse [either 0
(10PPS) or 1 (20PPS)].
Assign trunks to trunk groups then
go to Program 14-06-01 below to
set up Trunk Group Routing.
Used to set the priority order
number 1~4.
Determine if the ISDN calling line
identity presentation and screening
indicators are to be allowed.
UNIVERGE SV8100
Assigned Data
1
Dial up to 12 digits
#
(0~9, , )
(default not assigned)
0 = E164
(default = 0)
0 = No (Disable)
1 = Yes (Enable)
(default = 0)
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
Up to 12 digits (0~9)
(default not assigned)
0 = Disable
1 = Enable
(default = 0)
0 ~ 128
(default = 0)
0=Dial Pulse (10 PPS)
1=Dial Pulse (20 PPS)
2=DTMF
(default = 2)
Trunks 1~200
Trunk Port 1~200,
Group 1,
Priority 1~200
0 = Not Specify1~100 :
(Trunk Group
Number)1001~1100 :
(1000 + Route Table
Number)
Default:
Route 1, Order
Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified)
0 = Off
1 = On
(default = 1)
IP Trunk – H.323
Level
2 3