NEC Univerge SV8100 Features And Specifications Manual page 352

Issue 1.0
Program
Program Name
Number
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
20-09-08 Class of Service Options
(Incoming Call Service) – Calling
Party Information
20-10-01 Class of Service Options
(Answer Service) – Group Call
Pickup (Within Group)
2 - 328
Description/Comments
Turns Off (0) or On (1) a user Class
of Service from automatically
blocking outgoing Caller ID
information when a call is placed. If
block is enabled, the system
automatically inserts the Caller ID
block code 67 (defined in Program
14-01-21) before the user dialed
digits (this requires Program 14-02-
10 to be enabled). If block is
disabled, the system outdials the
call just as it was dialed by the user.
Turns Off or On an extension ability
to display the name and number of
the extension that dialed 911 (US
Only).
Turns Off or On an extension ability
to override the trunk access map
programming for outgoing calls.
Use to define the Class of Service
(COS) for voice over to busy virtual
extension.
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
Turns Off or On an extension user
ability to enable Handsfree
Answerback or Forced Intercom
Ringing for their incoming Intercom
calls.
Turns Off or On and extension
ability to display calling party
information on CCIS calls.
Turns Off or On Group Call Pickup
for calls ringing an extension Pickup
Group as well as ring group calls
#
(Service Code ).
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Cordless Telephone Connection
Level
1 2 3