Table 5-66. Primary Settings Register Definition Common To The 2 And 3 Winding Units - ABB TPU2000 Technical Manual

ANSI Curve Selection Type I
0 = Extremely Inverse
1 = Very Inverse
2 = Inverse
3 = Short Time Inverse
4 = Definite Time
5 = Long Time Extremely Inverse
6 = Long Time Very Inverse
7 = Long Time Inverse
8 = Recloser Curve
9 = Disabled
1 0 = User Curve 1
11 = User Curve 2
12 = User Curve 3
ANSI Curve Selection 87T
0 = Disable
1 = Percent Slope
2 = HU 30%
3 = HU 35%
4 = Percent 15% Tap
5 = Percent 25% Tap
6 = Percent 40% Tap
7 = User Curve 1
8 = User Curve 2
9 = User Curve 3
Table 5-66 lists the register assignments for the 6X registers for the Primary Settings Group Functions.

Table 5-66. Primary Settings Register Definition Common to the 2 and 3 Winding Units

Register
Address
61024 SPARE_1
61025 Execute Register
0 = No Action
1 = Update Registers
2 = Refresh Registers
61026 Access Password
61027 Access Password
61028 SPARE_2
61029 87T Curve Type
61030 87T Minimum I Operate
61031 87T Percent Restraint
61032 87T Restraint Mode
nd
61033 87T 2
th
61034 87T 5
61035 87T All Harmonic Restraint
61036 87H Tap X Byte
61037 87T-1 Amp
TPU2000/2000R Modbus/Modbus Plus Automation Guide
Item
Harmonic Restraint
Harmonic Restraint
ANSI Curve Type II
0 = Disable
1 = Standard
2 = Inverse
3 = Definite Time
4 = Short Time Inverse
5 = Short Time Extremely Inverse
6 = User Curve 1
7 = User Curve 2
8 = User Curve 3
Mode Selection Type 87T
0 = Disabled
nd
1 = 2 Harmonics
nd th
2 = 2 and 5 Harmonics
3 = All Harmonics
Description
Unsigned 16 Bits
ASCII – 2 Characters Leftmost Digits
ASCII – 2 Characters Rightmost Digits
Unsigned Integer 16 Bits
Unsigned 16 Bits
0.2 <=Range <=1.0 (X10)
15<=Range<=60
Unsigned Integer 16 Bits
Refer to Mode Selection Table
Unsigned Integer 16 Bits
7.5<=Range<=25 (X10)
Unsigned Integer 16 Bits
15<=Range<=40 (X10)
Unsigned Integer 16 Bits
15<=Range<=40 (X10)
Unsigned Integer 16 Bits
6 <=Range<=20 (X10)
Unsigned Integer 16 Bits
2<=Range<=9 (X10)
0.4<=Range<=1.8 (X50)
193