ABB TPU2000 Technical Manual page 321

9 Trip and Energize Commands ( 3 9 n )
N
0
2
3
9.0 Trip Command (3 9 0)
The TRIP command will be issued to the TPU. This command has a data message that contains the Password and a command
verification code for trip.
Msg byte
1/1
1/2
1/3
2/1
2/2
2/3
9.2 Energize Output Contact Command (3 9 2)
The test output contact command will be issued to the TPU. This command has a data message that contains the Password
and a command verification code and a 16 bit word indicating which contacts should be closed.
The output contact will be a momentary closure for the time period specified in the configuration menu for trip failure time.
Msg byte
1/1
1/2
1/3
2/1
2/2
2/3
3/1
3/2
3/3
4/1
4/2
4/3
TPU2000/2000R Modbus/Modbus Plus Automation Guide
Definition
Trip Command
Energize Output Contact Command
Set/Reset Outputs Command
Definition
Most significant high byte of password
Most significant low byte of password
Least significant high byte of password
Least significant low byte of password
spare
Command + Subcommand = 0x90
Definition
Most significant high byte of password
Most significant low byte of password
Least significant high byte of password
Least significant low byte of password
spare
Command + Subcommand = 0x92
Output Contact State
Bit 0-7 - Spare
Output Contact State
Bit 0 - TRIP
Bit 1 - OUT1
Bit 2 - OUT2
Bit 3 - OUT3
Bit 4 - OUT4
Bit 5 - OUT5
Bit 6 - OUT6
Bit 7 - OUT7
Output Contact State Confirmation
Bit 0-7 - Spare
Output Contact State Confirmation
Bit 0 - TRIP
Bit 1 - OUT1
Bit 2 - OUT2
Bit 3 - OUT3
Bit 4 - OUT4
Bit 5 - OUT5
Bit 6 - OUT6
Bit 7 - OUT7
Checksum high byte
Checksum low byte
311