Counters; Table 5-74. Counter Register Assignment - ABB TPU2000 Technical Manual

61438 LCD Contrast Adjust
61439 Relay Password
61440 Relay Password
61441 Test Password
61442 Test Password
61443 Meter Winding Mode
61444 VT Configuration
61445 VT Ratio
The Configuration Files for the 3 Winding TPU2000R is as follows:
Table 5-73. TPU2000/2000R Configuration Setting Register Setting
Register Item
Address
63584 SPARE_1
63585 Execute Register
0 = No Action
1 = Update Registers
2 = Refresh Registers
63586 Access Password
63587 Access Password
63588 SPARE_2
63589 Winding 3 Phase CT Ratio
63590 Winding 3 Neutral CT Ratio
63591 Winding 3 Ground CT Ratio
63592 Winding 3 CT Configuration
63593 Winding Phase Comp – Windings
1-3

Counters

TPU2000/TPU2000R has the ability to count breaker operations in a variety of modes. The same registers can
be accessed via a Modbus Code 03 (Read Holding Registers). For 4X read access, refer to Table 22. The same
information can be read via the refresh register capability through Register 61922.
Counters, write the value of 0 to Registers 61536 through 61547.
Table 5-74 is common to both the 2 Winding and 3 Winding TPU2000R and TPU2000 (available in 2 Winding
Format Only). Table 5-74 is only available for configuration of the TPU2000R 3 Winding Relay.

Table 5-74. Counter Register Assignment

TPU2000/2000R Modbus/Modbus Plus Automation Guide
3 = 60
Unsigned Integer 16 Bits
0<=Range <= 63
ASCII – 2 Characters Leftmost Digits
ASCII – 2 Characters Rightmost Digits
ASCII – 2 Characters Leftmost Digits
ASCII – 2 Characters Rightmost Digits
Unsigned Integer
0 = Winding 1
1 = Winding 2
2 = Winding 3
Unsigned Integer 16 Bits
0 = 69 V Wye
1 = 120V Wye
2 = 120V Delta
3 = 208 V Delta
Unsigned Integer 16 Bits
1<=Range<=45000
Description
Unsigned 16 Bit
ASCII – 2 Characters Leftmost Digits
ASCII – 2 Characters Rightmost Digits
Unsigned Integer 16 Bits
1<=Range<=4000
Unsigned Integer 16 Bits
1<=Range<=4000
Unsigned Integer 16 Bits
1<=Range<=4000
Unsigned Integer 16 Bits
0 = Wye
1 = Delta, IA-IC
2 = Delta, IA- IB
Unsigned Integer 16 Bits
0<=Range <=330 / 30
To reset the Breaker
209