Kenwood NX-5000 Series Common Function Reference page 15

About the Programming Software
About System Type
For KPG-D1/ D1N, a System Type (Analog Conventional, P25 Conventional, NXDN Conventional, P25 Trunking, NXDN
Trunking, LTR Trunking, P25 Voting with NAC, NXDN Site Roaming or NXDN Site Roaming with RAN, or DMR Conventional,
DMR Site Roaming) needs to be selected in System Information of KPG-D1/ D1N in order to configure the system data
or Zone-channel data of each communication system.
In this manual, for the description of each function written as "Configuration using KPG-D1/ D1N", a corresponding reference
in the help texts of KPG-D1/ D1N is described as follows:
Configuring Unit ID (Own) (
ID (Own))
In this case, if "NXDN Conventional" is selected in System Type of System Information, Unit ID (Own) can be configured
in an NXDN Conventional system.
Refer to the help texts of KPG-D1/ D1N for the method of System Type configuration using KPG-D1/ D1N.
About Multi RF Deck/ Multi Control Head
For Mobile, by connecting 1 or 2 Control Heads to multiple mobile transceivers (RF Deck), 1 Multi RF Deck system can be
structured.
Refer to "MULTI RF DECK/ MULTI CONTROL
RF Deck/ Multi Control Head, and for the special functions of Multi RF Deck/ Multi Control Head.
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Personal > System Information > NXDN Conventional > Unit
HEAD" for the instructions on how to structure and how to configure Multi
CONTENTS INDEX
xiv