Monitoring The Communications Of Control Heads (Transmit Audio Monitor) - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.7 Audio Function

Monitoring the Communications of Control Heads (Transmit Audio Monitor)

Transmit Audio Monitor is the function to monitor the audio of the transmitting Control Head by the speaker of the other
Control Head when transmitting on the connected Control Head 1 and Control Head 2. The function is for Dual Control
Head. The conversation can be heard even if the 2 Control Heads are at remote locations. Also, by using the Talk Interrupt
function, one Control Head can send notifications such as a request for stopping transmission to the other transmitting
Control Head by voice, and the Talk Interrupt function can be used for transmission during an emergency. Also, the voice
communication can be monitored by the external speaker connected to the Selected RF Deck.
The transceiver behaves as follows according to the configuration in Transmit Audio Monitor (Disable, w/o Talk Interrupt,
w Talk Interrupt):
0
Disable
This configuration value is the default configuration value, and basically the behavior is the same as the behavior of normal
transmission. The audio of the transmitting Control Head cannot be monitored by the other Control Head when transmitting.
0
w/o Talk Interrupt
The audio of the transmitting Control Head can be monitored by the other Control Head when transmitting. The displays of
both Control Head 1 and Control Head 2 are in the normal state while transmitting.
Transmitted Audio
Common FUNC (K, F)/Ver 2.20
Transmitted Audio Output Received Audio Output
External External
Speaker Speaker
Audio Reception
RF Deck 1 RF Deck 2
(Selected RF (Unselected RF
Deck) Deck)
KRK-15B KRK-15B
is pressed.
KRK-14H
Basic Panel
Mic
Audio Input
LED lit red
Figure 16-43 w/o Talk Interrupt
Received Audio Output
External
Speaker
Audio Reception
RF Deck 3
(Unselected RF
Deck)
KRK-15B
KRK-14H
Basic Panel
Transmitted Audio
Mic
LED lit red
CONTENTS
284
INDEX