Receiving A Call (Alert Tone Restriction From 2Nd Call) - Kenwood NX-5000 Series Common Function Reference

6 SOUND
6.6 Restricting Alert Tone When Consecutively Receiving a Call (Alert Tone Restriction from 2nd Call)
6.6 Restricting Alert Tone When Consecutively Receiving a Call
(Alert Tone Restriction from 2nd Call)
Alert Tone Restriction from 2nd Call is the function that disables the functions such as the storing of a Caller ID in the
transceiver stack memory and the activation of various alerts, if the transceiver consecutively receives an Individual Call
from the transceiver having the same Individual ID, or receives a Group Call with the same Group ID after the transceiver
receives an Individual Call or a Group Call.
For instance, emitting an Alert Tone from the transceiver every time the transceiver repeatedly and frequently receives a
call from the same party may be annoying. In that case, this function can be used to disable the Alert Tone for sounding
from the transceiver even if the transceiver receives a call from the same party in succession.
This function prevents these functions from activating as follows even if these functions are enabled or configured to be
enabled when the transceiver receives a call from the same party in succession.
Alert Tone
0
An Alert Tone does not sound from the transceiver even if the transceiver receives a call from the same party in
succession.
Selective Call Alert LED
0
A Selective Call Alert LED does not blink even if the transceiver receives a call from the same party in succession.
Horn Alert (Mobile only)
0
The headlights or the horn of a vehicle being connected to the Horn Alert port does not light or sound even if the
transceiver receives a call from the same party in succession.
Caller ID Stack
0
The Caller ID cannot be stored in the transceiver stack memory even if the transceiver receives a call from the same
party in succession.
When the transceiver receives an Individual Call or Group Call using this function, the transceiver behaves as follows.
0
Behavior examples of when the transceiver receives an Individual Call
If the transceiver receives an Individual Call, an Alert Tone does not sound from the transceiver even when the transceiver
receives an Individual Call again from the transceiver having the same Individual ID before the time configured in Auto
Reset Timer elapses.
Receiving
Individual ID 1
Various
functions such
as Alert Tone
Auto Reset Timer
A: The transceiver receives an Individual Call from the transceiver (Individual ID 1) having the same Individual ID before
the time configured in Auto Reset Timer elapses, so that various functions such as Alert Tone will not be activated.
B: Even before the time configured in Auto Reset Timer elapses, the transceiver receives an Individual Call from the
transceiver (Individual ID 2) having a different Individual ID, so that various functions such as Alert Tone will be activated.
C: Even if the transceiver receives an Individual Call from the transceiver (Individual ID 2) again, the time configured in
Auto Reset Timer elapsed, so that various functions such as Alert Tone will be activated.
Common FUNC (K, F)/Ver 2.20
Individual ID 1
A
Auto Reset
Timer stops.
Auto Reset Timer
Figure 6-2 Alert Tone Restriction from 2nd Call (Individual Call)
Individual ID 2
B
Auto Reset
Timer stops.
Auto Reset Timer Auto Reset Timer
CONTENTS
Individual ID 2
C
Auto Reset
Timer expires.
125
INDEX