Kenwood NX-5000 Series Common Function Reference page 84

3 BASIC OPERATIONS
3.7 Viewing the Receive History (Stack)
Note
The receive date and time list is displayed only if Time Stamp is enabled. (Refer to
0
Refer to Selecting or Clearing Data from a List
0
For Caller ID Stack, if System Type of the selected channel when the transceiver enters Stack Mode does not match
0
System Type of the stack data, a Warning Tone A (continuous beep) sounds from the transceiver and transmission is
unavailable even if the PTT switch is pressed. Also in this case, even if the Menu ([Q]) key is pressed, a Key-entry Error
Tone (1 beep) sounds from the transceiver and transmission is unavailable.
Configuration using KPG-D1/ D1N
0
Assigning functions to the PF keys on the transceiver (
0
Configuring Caller ID Stack (P25) (
0
Configuring Caller ID Stack (NXDN) (
0
Configuring Caller ID Stack (FleetSync) (
> Stack)
0
Configuring Caller ID Stack (MDC-1200) (
> Stack)
0
Configuring Status Message Stack (NXDN) (
Stack)
0
Configuring Status Message Stack (NXDN) (
Stack)
0
Configuring Caller ID Stack (DMR) (
0
Configuring Status Message Stack (DMR) (
0
Configuring Short Message Stack (DMR) (
0
Configuring Short Message Stack (FleetSync) (
General > Stack)
0
Configuring Short Message Stack (FleetSync) (
General > Stack)
Common FUNC (K, F)/Ver 2.20
for instructions on how to clear a message.
Transceiver Settings > Key Assignment)
Transceiver Settings > P25 > P25 Information > General > Stack)
Transceiver Settings > NXDN > NXDN Information > General > Stack)
Transceiver Settings > FleetSync > FleetSync Information > General
Transceiver Settings > MDC-1200 > MDC-1200 Information > General
Transceiver Settings > NXDN > NXDN Information > General >
Transceiver Settings > NXDN > NXDN Information > General >
Transceiver Settings > DMR > DMR Information > General > Stack)
Transceiver Settings > DMR > DMR Information > General > Stack)
Transceiver Settings > DMR > DMR Information > General > Stack)
Transceiver Settings > FleetSync > FleetSync Information >
Transceiver Settings > FleetSync > FleetSync Information >
Time Stamp.)
CONTENTS INDEX
53