Kenwood NX-5000 Series Common Function Reference page 387

17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.3 Replacing an RF Deck/ Control Head
Replacing an RF Deck
This section describes the procedure to replace an RF Deck in a system of a Triple RF Deck/ Dual Control Head structure.
Note
An RF Deck can be replaced with the same procedure when replacing the RF Deck in a system of the following RF Deck/
Control Head structures:
Dual RF Deck/ Single Control Head
0
Dual RF Deck/ Dual Control Head
0
Triple RF Deck/ Single Control Head
0
1
Turn OFF all RF Decks and Control Heads.
If either Control Head is turned OFF, all RF Decks and Control Heads are turned OFF.
2
Remove the RF Deck.
Remove the Control Head from a Multi RF Deck system.
Deck 1
RF
KRK-15B
Control Head
1
Common FUNC (K, F)/Ver 2.20
Deck 1
RF
KRK-15B
Control Head
1
Figure 17-38 Triple RF Deck/ Dual Control Head (Power OFF)
RF Deck 2
KRK-15B
Figure 17-39 Removal of RF Deck 3
RF Deck 2
KRK-15B
Power OFF
Deck 3
RF
KRK-15B
Control Head
2
Deck 3
RF
KRK-15B
Control Head
2
RF
KRK-15B
CONTENTS INDEX
Deck 3
356