Linking With The Microphone Hook (Off Hook Speaker Revert) - Kenwood NX-5000 Series Common Function Reference

10 BLUETOOTH COMMUNICATION
10.7 Switching the Speaker to Emit Audio (Bluetooth Speaker)
Connection Status
Bluetooth-
External
compatible
Speaker
Device
Connected Connected
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
Determining the Speaker to Emit by Linking with the Microphone Hook (Off-hook
Speaker Revert)
Supported Models: Mobile
Off-hook Speaker Revert is the function to determine whether to use the speaker of the transceiver or the speaker of the
Bluetooth-compatible device connected by Headset Profile, by linking with a microphone on- or off-hook state.
If Off-hook Speaker Revert is enabled, the speaker to emit is determined by the configuration of Bluetooth Speaker
regardless of the microphone on-hook or off-hook state.
If Off-hook Speaker Revert is disabled, the speaker to emit is determined as follows by the microphone hook state and
the configuration of Bluetooth Speaker.
Bluetooth Speaker
*1
Off
*1
Only
Both (Bluetooth +
*1
Radio)
Off
Only
Both (Bluetooth +
Radio)
The microphone goes to the off-hook state after changing the configuration of Bluetooth Speaker by pressing the
*1
Bluetooth Speaker key when the microphone is in the on-hook state.
Note
This function can be used only when a Bluetooth-compatible device connected by Headset Profile exists.
0
If Off-hook Speaker Revert is disabled, changing the microphone on- or off-hook state while the audio data is being
0
played back in Playback Mode pauses the playing.
Configuration using KPG-D1/ D1N
Configuring Off-hook Speaker Revert to be enabled or disabled (
Optional Features 2 > GPS/Bluetooth > Bluetooth)
Common FUNC (K, F)/Ver 2.20
Configuration Status
External Speaker
Internal + External (Mobile only)
Off
On
Internal + External (Mobile only)
Table 10-12 Off-hook Speaker Revert
The
Microphone Speaker to Emit Audio
Hook Status
Transceiver
Transceiver
Off
Transceiver + Bluetooth-
compatible device
Transceiver
Bluetooth-compatible device
On
Transceiver + Bluetooth-
compatible device
Bluetooth Speaker
Only
Both (Bluetooth+Radio) (Mobile only)
Both (Bluetooth+Radio) (Mobile only)
Both (Bluetooth+Radio) (Mobile only)
Transceiver Settings > Key Assignment)
When the Microphone Hook Status is
The
Microphone
Hook Status
Off N On
On N Off
Transceiver Settings > Optional Features >
CONTENTS
Audio Output Pattern
Bluetooth-
Internal External
compatible
Speaker Speaker
Device
No output No output Output
Output No output Output
No output Output Output
Output Output Output
changed
Speaker to Emit Audio
Transceiver
Bluetooth-compatible Device
Transceiver + Bluetooth-
compatible device
Transceiver
Transceiver
Transceiver + Bluetooth-
compatible device
INDEX
205