Kenwood NX-5000 Series Common Function Reference page 454

19 CONFIGURATION FOR EACH FUNCTION
19.4 Available Functions for COM Port
COM Port Functions
The following functions of each communication port can be configured using KPG-D1/ D1N.
Function
Polarity is the logic of data lines for sending data using a communication port where "GPS" is assigned.
Polarity
However, Polarity of COM port 0 is fixed at Normal in order to communicate with KPG-D1/ D1N and the
configuration cannot be changed.
Stop Bit is the bit information for sending data using a communication port where "Data", "GPS", "Data
+ GPS Data Output", "Transparent", or "Transparent 2 (NXDN)" is assigned. "1" or "2" can be configured
for Stop Bit.
Stop Bit
However, for Mobile, Stop Bit of COM port 0 is fixed at "2" in order to communicate with KPG-D1/ D1N
and the configuration cannot be changed.
Baud Rate is the communication rate for sending data using a communication port where "Data", "GPS",
"Data + GPS Data Output", "Transparent", or "Transparent 2 (NXDN)" is assigned.
Baud Rate
Baud Rate can be configured by selecting from 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps.
Configuration using KPG-D1/ D1N
0
Configuring Polarity (
Port)
0
Configuring Stop Bit (
Port)
0
Configuring Baud Rate (
COM Port)
Serial Protocol Types
There are 2 types of serial protocols to be used for controlling a transceiver by using PC commands: Version 1 and Version
2. The serial protocol type (PC Interface Protocol) can be configured using KPG-D1/ D1N.
Configuration
The command sequence of this version starts with STX (Start of Text) and ends with ETX (End of Text).
Version 1
This version is compatible with transceivers that support the KENWOOD PC Interface Protocol.
This version is almost the same as the Version 1 data format, but it has the command sequence of
Version 2
Version 1 and a sequence number (SEQ).
Configuration using KPG-D1/ D1N
Configuring PC Interface Protocol (
Interface)
Common FUNC (K, F)/Ver 2.20
Table 19-10 COM Port Functions
Transceiver Settings > Optional Features > Optional Features 1 > Serial Interface > COM
Transceiver Settings > Optional Features > Optional Features 1 > Serial Interface > COM
Transceiver Settings > Optional Features > Optional Features 1 > Serial Interface >
Table 19-11 Serial Protocol Types
Transceiver Settings > Optional Features > Optional Features 1 > Serial
Description
Description
CONTENTS
423
INDEX