Kenwood NX-5000 Series Common Function Reference page 427

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Function Name
The code in the 2nd digit from the last digit of the Selcall code of 5-tone
decreases by one.
Digit 10x Down
See
5-tone FUNC
The code in the 2nd digit from the last digit of the Selcall code of 5-tone
increases by one.
Digit 10x Up
See
5-tone FUNC
The code in the 1st digit from the last digit of the Selcall code of 5-tone
decreases by one.
Digit 1x Down
See
5-tone FUNC
The code in the 1st digit from the last digit of the Selcall code of 5-tone
increases by one.
Digit 1x Up
See
5-tone FUNC
Migrates to a channel configured as a Direct Channel.
Direct Channel 1
to Direct Channel See
5
Changing the Channel with a Single Touch
Determines the displayed channel as a Direct Channel.
See
Changing the Channel with a Single Touch
Direct Channel 1
Select to Direct
Note
Channel 5 Select
Direct Channel 1 Select to Direct Channel 5 Select can be configured only
in Hold for the Direct Channel 1 to Direct Channel 5 keys, and the
configuration cannot be changed.
Display Format Toggles between the Channel Name display and the Zone-channel display.
Enters Eject SD Card Mode, and the clearing of microSD card recognition is
enabled.
Eject SD Card
See
Removing the microSD Card
Enters Emergency Mode.
See
NXDN FUNC
0
P25 FUNC
0
DMR FUNC
0
Emergency
Note
For Portable, "Emergency" can be assigned to the AUX key or the PF 1 key
0
of the speaker microphone only as the function when the key is held.
For Mobile, "Emergency" can be assigned to the AUX key only as the
0
function when the key is held.
Toggles between the external speaker connected to the transceiver and the
External Speaker
internal speaker of the transceiver.
Changes the tone level in the following order: Low N High N Off.
Fixed Volume
See
SOUND
Enters Front Panel Programming Mode. In Front Panel Programming mode,
data such as the frequency of a Conventional Channel can be changed, or a
Conventional Channel can be added.
Front Panel
Programming See
Changing the Configuration of the Transceiver (Front Panel Programming
Mode)
Common FUNC (K, F)/Ver 2.20
Description
Changing the Selcall Code with the Digit Specified
Changing the Selcall Code with the Digit Specified
Changing the Selcall Code with the Digit Specified
Changing the Selcall Code with the Digit Specified
COMMUNICATIONS IN AN EMERGENCY
COMMUNICATIONS IN AN EMERGENCY
COMMUNICATIONS IN AN EMERGENCY
Available
Communication
Systems
Analog Conventional
Analog Conventional
Analog Conventional
Analog Conventional
ALL
ALL
ALL
ALL
ALL
ALL
ALL
Analog Conventional
P25 Conventional
NXDN Conventional
DMR Conventional
CONTENTS INDEX
*1
396