Formatting A Microsd Card - Kenwood NX-5000 Series Common Function Reference

9 STORING RECORDED AUDIO/ GPS DATA
9.1 About microSD Card

Formatting a microSD Card

In order to use a microSD card on the transceiver, the microSD card needs to be formatted in advance in Format SD Card
Mode.
Pressing the Format SD Card key places the transceiver in Format SD Card Mode. Or, pressing the Menu key to enter
Menu Mode and then selecting "Format SD Card" places the transceiver in Format SD Card Mode. (Refer to
Mode.)
Operating the transceiver
1
Press the Format SD Card
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver enters Format SD Card Mode.
The following operations are identical even if the transceiver enters Format
SD Card Mode by pressing the Menu key.
Note
In the following cases, pressing the Format SD Card key sounds a Key-
entry Error Tone (1 beep) from the transceiver, and the transceiver does
not enter Format SD Card Mode.
If no microSD card is inserted
0
If the microSD card is being accessed
0
If "Unsupported SD" is displayed
0
2
Press the Menu ([
A Key Beep A (1 beep) sounds from the transceiver, and then the screen to select whether to execute formatting
appears.
3
Press the [ ] key or
Common FUNC (K, F)/Ver 2.20
key.
]) or [ ] key.
[ ] key and select "Start".
Using Menu
Format Card
Y o u w i l l l o s e a l l
d a t a o n t h e c a r d .
N ex t
Format Card
C a n c e l
S t a r t
O K
CONTENTS INDEX
12 : 34 A
M
Bac k
12 : 34 A
M
2
Bac k
154