Kenwood NX-5000 Series Common Function Reference page 439

Hide thumbs Also See for NX-5000 Series:
Table of Contents

Advertisement

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Function Name
The Talkgroup ID changed in Talkgroup ID Select Mode is restored to the value
configured using KPG-D1/ D1N.
Talkgroup Reset
See
P25 FUNC
Telephone
The transceiver sends a disconnect signal (# of DTMF Code) when the
Disconnect
transceiver is connecting to a telephone line of an LTR Trunking system.
Enters Transceiver Password Mode. In Transceiver Password Mode, the
transceiver cannot be used until the correct password is entered.
Transceiver
Password
See
Password for Transceiver Operation (Transceiver Password)
Toggles the Transfer between enabled and disabled.
Transfer (Mobile
See
only)
5-tone FUNC
The configuration of Unselected RF Deck Speaker switches to "Unmute" or
"Mute".
See
Unselected RF
Switching the Output Status of the External Speaker (Unselected RF Deck
Deck Speaker
Speaker)
(Mobile only)
Note
This function can be used only in a Multi RF Deck system of Mobile.
Toggles the Vibrator between enabled and disabled.
Vibrator (Portable
See
only)
Using the Vibrator
The transceiver enters Voice Memo Mode and starts recording to a microSD
card.
Voice Memo
See
Recording Audio to a microSD Card (Voice Memo)
Volume Down
Decreases the volume level in steps of 1.
(Mobile only)
Pressing and holding the Volume Down (Continuous) key will decrease the
volume level in steps of 1 every 100 ms.
Volume Down
(Continuous)
Note
(Mobile only)
Volume Down (Continuous) can be configured only in Hold for the Volume
Down key, and the configuration cannot be changed.
Volume Up
Increases the volume level in steps of 1.
(Mobile only)
Pressing and holding the Volume Up (Continuous) key will increase the
volume level in steps of 1 every 100 ms.
Volume Up
(Continuous)
Note
(Mobile only)
Volume Up (Continuous) can be configured only in Hold for the Volume
Up key, and the configuration cannot be changed.
Enters VOX Gain Level Mode. In VOX Gain Level Mode, the microphone
sensitivity of VOX can be adjusted.
VOX
See
VOX
Common FUNC (K, F)/Ver 2.20
Description
Making a Group Call
Transferring the Received 5-tone Code (Transfer)
Available
Communication
Systems
P25 Conventional
LTR Trunking
ALL
Analog Conventional
ALL
ALL
ALL
ALL
ALL
ALL
ALL
Analog Conventional
NXDN Conventional
P25 Conventional
DMR Conventional
CONTENTS
INDEX
*1
408

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-5400Nx-5800Nx-5200Nx-5700Nx-5900Nx-5300

Table of Contents