Kenwood NX-5000 Series Common Function Reference page 78

3 BASIC OPERATIONS
3.5 Changing the Zone-channel
Operating the transceiver
0
Migrating to the Direct Channel
1
Press one of the Direct Channel 1
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver migrates to the Direct Channel regardless of the selected zone.
"DRn" appears on the display. The selected Direct Channel number is
entered in "n".
If the same Direct Channel key is pressed again while the Return function
is enabled, a Key Beep B (2 beeps) sounds from the transceiver, and then
the transceiver returns to the previous channel.
0
Changing the Direct Channel
1
Select the channel to be configured as the Direct Channel.
2
Press one of the Direct Channel 1 Select
A Key Beep C (3 beeps) sounds from the transceiver, and then the Direct
Channel is changed. "DRn" appears on the display at the same time.
Configuration using KPG-D1/ D1N
0
Configuring Direct Channel (
0
Configuring the Return function to be enabled or disabled (
Channel)
0
Assigning functions to the PF keys on the transceiver (
Common FUNC (K, F)/Ver 2.20
to Direct Channel 5 keys.
to Direct Channel 5 Select
Transceiver Settings > Key Assignment > Direct Channel)
Transceiver Settings > Key Assignment)
D R 1
Z o n e 1
C h a n n e l 1
M en u
Z o n e 1
C h a n n e l 1 5
M en u
Z o n e 1
C h a n n e l 1 5
M en u
keys.
D R 1
Z o n e 1
C h a n n e l 1 5
M en u
Transceiver Settings > Key Assignment > Direct
CONTENTS
12 : 34 A
M
Zo ne+
12 : 34 A
M
Zo ne+
12 : 34
A
M
Zo ne+
12 : 34 A
M
Zo ne+
47
INDEX