Kenwood NX-5000 Series Common Function Reference page 75

3 BASIC OPERATIONS
3.5 Changing the Zone-channel
Changing the Group ID by Specifying the ID (Group ID Entry) (NXDN Trunking
System Only)
Group ID Entry is the function to migrate the transceiver to the channel with the Group ID which is directly selected and to
be used in an NXDN Trunking system.
The Group ID to be used can be specified by directly entering a Group ID after pressing the Group ID/Channel Entry key
when a zone in an NXDN Trunking system is selected.
Also, if "Group ID/Channel Entry" is configured in Keypad Operation, the Group ID can be specified by pressing the [0] to
[9] keys on the keypad while a zone in an NXDN Trunking system is selected.
By specifying a Group ID configured for a zone in an NXDN Trunking system, the transceiver can migrate to a channel with
the Group ID.
The transceiver automatically recognizes the digits of the highest Group ID in all the zones in an NXDN Trunking system
configured for the transceiver.
Operating the transceiver
1
Press the Group ID/Channel Entry
The transceiver enters Group ID Entry Mode.
The following operations are identical even if the transceiver enters Group
ID Mode by using the keypad.
2
Enter a Group ID.
The following are examples for entering a Group ID by using the keypad.
0 If the maximum Group ID has 5 digits:
To enter Group ID 21250, press the [2], [1], [2], [5] and [0] keys in this order.
To enter Group ID 1250, press the [0], [1], [2], [5] and [0] keys in this order.
To enter Group ID 250, press the [0], [0], [2], [5] and [0] keys in this order.
To enter Group ID 90, press the [0], [0], [0], [9] and [0] keys in this order.
To enter Group ID 7, press the [0], [0], [0], [0] and [7] keys in this order.
0
If the maximum Group ID has 4 digits:
To enter Group ID 1250, press the [1], [2], [5] and [0] keys in this order.
To enter Group ID 250, press the [0], [2], [5] and [0] keys in this order.
To enter Group ID 90, press the [0], [0], [9] and [0] keys in this order.
To enter Group ID 7, press the [0], [0], [0] and [7] keys in this order.
0
If the maximum Group ID has 3 digits:
To enter Group ID 250, press the [2], [5] and [0] keys in this order.
To enter Group ID 90, press the [0], [9] and [0] keys in this order.
To enter Group ID 7, press the [0], [0] and [7] keys in this order.
0
If the maximum Group ID has 2 digits:
To enter Group ID 90, press the [9] and [0] keys in this order.
To enter Group ID 7, press the [0] and [7] keys in this order.
0
If the maximum Group ID has 1 digit:
To enter Group ID 7, press the [7] key.
If the maximum number of digits is entered, the transceiver exits Group ID Entry Mode and then migrates to the
channel of the entered Group ID.
Common FUNC (K, F)/Ver 2.20
key after an NXDN Trunking system zone is selected.
G r o u p E n t r y
G r o u p ID
O K
CONTENTS INDEX
12 : 34 A
M
[00001]
___
44