Kenwood NX-5000 Series Common Function Reference page 241

11 EXTERNAL PORTS
11.1 Universal Connector
Operating the transceiver
1
Press the Vibrator
The " " icon appears and then the Vibrator function is enabled. The
vibrator vibrates for a second.
2
Press the Vibrator
The " " icon disappears and then the Vibrator function is disabled.
Note
If the Vibrator key is not configured while "Vibrator" is configured in Universal Connector Pin Number 11, the Vibrator
0
function is automatically enabled when the transceiver is turned ON. (Refer to
Connector.)
The status of the Vibrator function is retained even if the transceiver is turned OFF.
0
The function assigned to a key that is pressed while the vibrator is vibrating does not function. However, the following
0
functions function:
Emergency key
0
Backlight key
0
Key Lock key
0
Function key
0
Zeroize key
0
While the " " icon blinks, the vibrator does not function even if the functioning conditions for the vibrator are satisfied.
0
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
without Alert Tone
without Alert Tone is the function to configure the transceiver not to emit an Alert Tone when the conditions for the vibrator
to function are satisfied and the vibrator functions. (Refer to
If an Alert Tone sounds from the transceiver in quiet environments, it may bother other people. In this case, the transceiver
can be configured to mute Alert Tones and a user can recognize the reception of a call or message only from the vibration
of the vibrator.
After disabling this function, the vibrator vibrates and Alert Tones sound from the transceiver if the conditions for the vibrator
to function are satisfied. However, a user may not recognize a call or message is being received only from the vibration of
the vibrator. In this case, an Alert Tone notifies a user that a call or message is being received.
Configuration using KPG-D1/ D1N
Configuring without Alert Tone to be enabled or disabled (
Common FUNC (K, F)/Ver 2.20
key.
key again.
Assigning Functions to the Universal
Transceiver Settings > Key Assignment)
Conditions for the Vibrator to
Transceiver Settings > Extended Function > Vibrator)
CONTENTS
12 : 34
Z o n e 1
C h a n n e l 1
M en u Zo ne+
Function.)
INDEX
A
M
210