Kenwood NX-5000 Series Common Function Reference page 85

3 BASIC OPERATIONS
3.7 Viewing the Receive History (Stack)
Configuring the Display Order of Data in Stack Mode (Stack Order)
Stack Order is the display order of data in Stack Mode.
Depending on the configuration of Stack Order, the data is displayed in Stack Mode as follows:
Configuration
Descending The newest data appears on the first line of the list.
Ascending The oldest data appears on the first line of the list.
Configuration using KPG-D1/ D1N
Configuring Stack Order (
Enabling the Storage of Redundant Data (Repeated Calls Stack)
Repeated Calls Stack is the function to enable the storage of redundant data.
If Repeated Calls Stack is enabled, a Caller ID or message is stored as new data in the stack memory of the transceiver
even if the same Caller ID or message has been previously received.
Configuration using KPG-D1/ D1N
Configuring Repeated Calls Stack to be enabled or disabled (
Features 1 > Stack)
Displaying the Caller ID when Displaying a Message (Caller ID for Message)
Caller ID for Message is the function to display the Caller ID of the stored data when the Status Message or Short Message
is displayed in Stack Mode.
Configuration using KPG-D1/ D1N
Configuring Caller ID for Message to be enabled or disabled (
Features 1 > Stack > Message Display)
Common FUNC (K, F)/Ver 2.20
Table 3-8 Stack Order
Transceiver Settings > Optional Features > Optional Features 1 > Stack)
Description
Transceiver Settings > Optional Features > Optional
Transceiver Settings > Optional Features > Optional
CONTENTS
54
INDEX