Kenwood NX-5000 Series Common Function Reference page 389

17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.3 Replacing an RF Deck/ Control Head
5
Turn ON all RF Decks and Control Heads.
If either Control Head is turned ON, all RF Decks and Control Heads are turned ON.
Note
If "FIRM MISMATCH" is displayed on the screen of the Control Head, proceed to step 6.
0
If "FPU MISMATCH" is displayed on the screen of the Control Head, proceed to step 7.
0
6
Write the firmware.
To activate Multi RF Deck/ Multi Control Head, the firmware version 1.62.00 or later needs to be written.
The firmware version of a Control Head can be confirmed in Radio Mode Selection.
KFL
Figure 17-43 Triple RF Deck/ Dual Control Head (Firmware Setting)
Note
If "FPU MISMATCH" is displayed on the screen of the Control Head, proceed to step 7.
Common FUNC (K, F)/Ver 2.20
Deck 1
RF
KRK-15B
Control Head
1
Figure 17-42 Triple RF Deck/ Dual Control Head (Power ON)
Deck 1
RF
KRK-15B
Control Head
1
RF Deck 2
KRK-15B
RF Deck 2
KRK-15B
CONTENTS
Deck 3
RF
KRK-15B
Control Head
2
Deck 3
RF
KRK-15B
Control Head
INDEX
2
358