Kenwood NX-5000 Series Common Function Reference page 277

15 MODE
15.6 Checking the Firmware Version (Transceiver Information Mode)
Note
To end Transceiver Information Mode, the transceiver must be turned OFF.
Configuration using KPG-D1/ D1N
Configuring whether to permit the use of Transceiver Information Mode (
> Optional Features 1 > Mode)
15.7 Testing or Adjusting the Transmit and Receive Capabilities of
the Transceiver (PC Test Mode/ PC Tuning Mode)
PC Test Mode can be used to test transmit and receive capabilities of the transceiver by using KPG-D1/ D1N.
PC Tuning Mode can be used to adjust transmit and receive capabilities of the transceiver by using KPG-D1/ D1N.
To test or adjust the transceiver in each mode, the transceiver and a PC with KPG-D1/ D1N installed need to be connected
by using the programming cable. (Refer to
After connecting the transceiver and the PC, clicking the "Test Mode" button on the Program menu in the main window of
KPG-D1/ D1N opens the Test Mode dialog box. By selecting an item from the tuning item list in the Test Mode dialog box
and double-clicking it, the tuning dialog box of the selected item opens.
Note
Refer to the service manual for operating the transceiver in PC Test Mode and PC Tuning Mode, and instructions on how
to adjust transmit and receive capabilities.
Common FUNC (K, F)/Ver 2.20
Connecting the Transceiver to a
Figure 15-1 Test Mode Dialog Box
Transceiver Settings > Optional Features
PC.)
CONTENTS INDEX
246