Behavior Of The Transceiver When Pairing Cannot Occur - Kenwood NX-5000 Series Common Function Reference

10 BLUETOOTH COMMUNICATION
10.3 Registering and Connecting a Bluetooth-compatible Device to the Transceiver (Pairing/ HSP Connection)
Note
The connection process continues even if a Voice Call or Data Call is received during the connection process.
0
Mode Reset Timer is extended during the connection process.
0
If a pairing request is received from a Bluetooth-compatible device when Key Lock is enabled, Key Lock is
0
temporarily disabled with the "
operations:
Confirming the PIN Code
0
Completing Passkey confirmation
0
Aborting the current mode
0

Behavior of the Transceiver When Pairing Cannot Occur

If pairing cannot occur, the transceiver behaves as follows:
Table 10-5 Behavior of the Transceiver When Pairing Cannot Occur
Status
Pairing ends in one of the following conditions. In this case, a Bluetooth No Response Tone (1
beep) sounds from the transceiver, the LED turns Off, and "No Response" appears on the display
When nothing can be
for 1 sec.
received from the
Bluetooth-compatible
0
device
0
When the Bluetooth- If the transceiver starts pairing for the Bluetooth-compatible device and pairing is rejected, pairing
compatible device ends. In this case, a Bluetooth Connect Denied Tone (2 beeps) sounds from the transceiver, the
rejects pairing blue LED turns Off, and "Connect Denied" appears on the display for 1 sec.
If pairing for a Bluetooth-compatible device is started from the transceiver, the transceiver checks
When the Bluetooth-
whether the Bluetooth-compatible device supports the Headset Profile. If the Bluetooth-compatible
compatible device
device does not support the Headset Profile, pairing ends. In this case, a Bluetooth No Service
does not support
Tone (3 beeps) sounds from the transceiver, the LED turns Off, and "BT No Service" appears on
Headset Profile
the display for 1 sec.
If the PIN Code entered on the transceiver differs, or if the Fixed PIN and the PIN Code entered
When the PIN Code is on the Bluetooth-compatible device differ, pairing ends. In this case, a Bluetooth Connect Invalid
incorrect Tone (3 beeps) sounds from the transceiver, the LED turns Off, and "BT PIN Invalid" appears on
the display for 1 sec.
Pairing ends in one of the following conditions when the transceiver starts pairing for the Bluetooth-
compatible device. In this case, a Bluetooth Connect Denied Tone (2 beeps) sounds from the
transceiver, the LED turns Off, and "Connect Denied" appears on the display for 1 sec.
0
When nothing operates
0
0
0
If pairing occurs with a Bluetooth-compatible device which supports Secure Simple Pairing, which
does not have a display function, and which has an input function, pairing ends. In this case, a
If Passkey Entry
Bluetooth No Service Tone (3 beeps) sounds from the transceiver, the LED turns Off, and "BT No
Service" appears on the display for 1 sec.
Common FUNC (K, F)/Ver 2.20
" icon displayed. Key Lock is restored to the enabled state by one of the following
The transceiver starts pairing for the Bluetooth-compatible device, and the Bluetooth-
compatible device does not respond even if about 10 sec elapse.
The transceiver moves outside the Bluetooth operation range while pairing.
30 sec elapse without pressing the Menu ([Q]) or [*] key after "Passkey" appears on the display.
30 sec elapse without confirming the PIN Code after the PIN Code entry screen appears.
30 sec elapse without the Bluetooth-compatible device completing confirmation of the Passkey.
30 sec elapse without the Bluetooth-compatible device confirming of the PIN Code.
Transceiver Behavior
CONTENTS
192
INDEX