Kenwood NX-5000 Series Common Function Reference page 438

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Function Name
Toggles the Surveillance between enabled and disabled. While the
Surveillance function is enabled, the transceiver does not emit a tone or light
the backlight even when the transceiver functions.
Surveillance
Note
For Mobile, this function cannot be used in a Multi RF Deck/ Dual Control
Head structure.
Decreases the system name in steps of 1. System Lock is enabled in the
System Down
selected system.
Pressing and holding the System Down key causes the system name to be
System Down
decreased in steps of 1 every 100 ms. System Lock is enabled in the selected
(Continuous)
system.
System Lock Toggles the System Lock between enabled and disabled.
P25 Trunking:
The RFSS ID and Site ID of the site currently being used appears for 2 sec.
NXDN Trunking:
System Search The Site No. appears.
See
P25 FUNC
0
NXDN FUNC
0
P25 Trunking:
Pressing and holding the System Search key starts a system search.
NXDN Trunking:
Pressing and holding the System Search key starts a control channel hunt.
System Search
Note
Function
System Search Function can be configured only in Hold for the System
Search key, and the configuration cannot be changed.
See
P25 FUNC
0
NXDN FUNC
0
System Select Enters System Select Mode.
Increases the system name in steps of 1. System Lock is enabled in the
System Up
selected system.
Pressing and holding the System Up key causes the system name to be
System Up
increased in steps of 1 every 100 ms. System Lock is enabled in the selected
(Continuous)
system.
When the transceiver is not in Tactical Zone Mode, pressing the Tactical
Tactical Zone
Zone key registers the selected channel in Tactical Zone.
When the transceiver is not in Tactical Zone Mode, pressing the Tactical Zone
Tactical Zone (All
(All Channels) key registers all at once all the corresponding channels of the
Channels)
selected zone in Tactical Zone.
Toggles the Talk Around between enabled and disabled.
See
P25 FUNC
0
Talk Around
NXDN FUNC
0
DMR FUNC
0
Direct Mode)
Common FUNC (K, F)/Ver 2.20
Description
Manually Searching for a New Site (System Search)
Starting the Control Channel Hunt Manually (Forced Search)
Manually Searching for a New Site (System Search)
Starting the Control Channel Hunt Manually (Forced Search)
Communicating Without Using a Repeater (Talk Around)
Communicating Without Using a Repeater (Talk Around)
Communicating Without Using a Repeater (Talk Around/ DMR
Available
Communication
Systems
ALL
NXDN Trunking
NXDN Trunking
NXDN Trunking
P25 Trunking
NXDN Trunking
P25 Trunking
NXDN Trunking
NXDN Trunking
NXDN Trunking
NXDN Trunking
Analog Conventional
P25 Conventional
Analog Conventional
P25 Conventional
Analog Conventional
P25 Conventional
NXDN Conventional
LTR Trunking
DMR Conventional
CONTENTS INDEX
*1
407