Audio Function - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD

16.7 Audio Function

16.7 Audio Function
This section describes the audio function available in a Multi RF Deck/ Multi Control Head structure.
Specifying a Control Head for Controlling the Volume (Master Volume Control)
Master Volume Control is the function to specify a Control Head for controlling the volume of an RF Deck. If the volume
level of the Control Head specified in Master Volume Control is changed, the volume levels of all RF Decks are changed
to the same volume level of the Control Head together.
If the volume level of a Control Head not configured in Master Volume Control is changed, only the volume level of the
operated Control Head is changed, and the volume levels of RF Decks are not changed.
The configuration in Master Volume Control can be changed by any of the following key operations:
1. The configuration in Master Volume Control is toggled every time the Master Volume Control key is pressed.
2. Entering Menu Mode by pressing the Menu key, and then executing "Master Volume Control" can toggle the
configuration in Master Volume Control.
The behavior if "Control Head 1" is configured in Master Volume Control
If the volume level of Control Head 1 is changed to 20, the volume levels of Control Head 1, RF Deck 1, and RF Deck 2 are
changed to 20. If the volume level of Control Head 2 not configured in Master Volume Control is changed, only the volume
level of Control Head 2 is changed.
Volume : 20
Common FUNC (K, F)/Ver 2.20
Received Audio of the
Selected RF Deck
Ext.
Volume : 20
SP
RF Deck 1
(Selected RF
Deck)
Control Head
VOL
1
Operation
Received Audio of the
Selected RF Deck
Figure 16-39 Master Volume Control = Control Head 1
Received Audio of the
Unselected RF Deck
Ext.
Volume : 20
SP
RF Deck 2
(Unselected
RF Deck)
Control Head
VOL
2 Volume : 10
Operation
Received Audio of the
Selected RF Deck
CONTENTS
279
INDEX