Kenwood NX-5000 Series Common Function Reference page 54

2 GETTING STARTED
2.3 Writing the Configuration Data to the Transceiver
Writing configuration data to multiple transceivers using Bluetooth communication
To write configuration data to multiple transceivers by using Bluetooth communication, click the "Multi Write (Bluetooth)"
button. A Bluetooth-compatible device (the transceiver) is detected in Write Data to Multiple Transceiver (Bluetooth),
and the configuration data can be written to the transceiver by Bluetooth communication.
About the writing of configuration data in a Multi RF Deck/ Multi Control Head
structure
Refer to "Configuring the FPU Data and Writing the FPU Data to Each RF
the writing of configuration data in a Multi RF Deck/ Multi Control Head structure for Mobile.
2.4 Reading the Configuration Data from the Transceiver
To change the data configured in the transceiver, read the configuration data from the transceiver to KPG-D1/ D1N, and
then write the configuration data to the transceiver after the configuration data has been changed.
Clicking the "Read" button in Program of KPG-D1/ D1N displays Read Data from the Transceiver. Clicking the "Read"
button of Read Data from the Transceiver enters FPU Programming Mode and starts reading the configuration data to
the transceiver.
Common FUNC (K, F)/Ver 2.20
Figure 2-3 Read Data from the Transceiver
Deck" in "Multi RF Deck/ Multi Control Head" for
CONTENTS INDEX
23