Kenwood NX-5000 Series Common Function Reference page 50

1 FUNCTIONS AND PANEL LAYOUT
1.3 About LCD
The following are key guides that appear while the transceiver is in Function Mode. (Refer to
Key Guide
OK
Select
Delete
Confirm
Exit
Next
Back
Prev (Mobile only)
Pause
Conn
Discon
Call
Send
Page
Cancel
K Disp (Mobile only)
Disp L (Mobile only)
K (Mobile only)
L (Mobile only)
I (Mobile only)
J (Mobile only)
List+
List-
View
Note
The key guide which appears while the transceiver is in Function Mode is only for the functions that can be activated.
0
Key Guide for a function assigned to and activated by pressing and holding a PF key appears only if no function is assigned
0
to the same key.
Example 1) "KeyLck" appears as Key Guide in the following case: Function = None, Hold = Key Lock
Example 2) "Light" appears as Key Guide in the following case: Function = Backlight, Hold = Key Lock
Common FUNC (K, F)/Ver 2.20
Table 1-1 Key Guide (Function Mode)
Determines the data of the entered characters, code, or list.
Determines the data of the selected characters, code, or list.
Deletes the data of the selected characters, code, or list.
Authenticates the entered password.
Aborts the Function Mode.
Proceeds to the next step.
Goes back to the previous step.
Restores the previous display.
Stops recording.
Enters the state to confirm connection with the device.
Enters the state to confirm disconnection with the device.
Initiates the call.
Sends the data.
Initiates the Paging Call.
Cancels the operation.
Switches the display.
Switches the display.
Selects a category.
Selects a category.
Plays back the audio data from the beginning.
Plays back the next audio data from the beginning.
Selects list data.
Selects list data.
Switches to the Short Message View display.
Function
Operation
CONTENTS
Mode.)
19
INDEX