Registering And Connecting Using Pf Keys (Define Bluetooth Device) - Kenwood NX-5000 Series Common Function Reference

10 BLUETOOTH COMMUNICATION
10.3 Registering and Connecting a Bluetooth-compatible Device to the Transceiver (Pairing/ HSP Connection)
5
Complete pairing.
When pairing completes, the Bluetooth-compatible device is registered in the transceiver, and the connection
process starts by HSP Connection.
If a connected Bluetooth-compatible device exists, the connection process starts after the connection is reset.
A Ring Tone sounds from the Bluetooth-compatible device during the connection process. In this case, start-up
operations need to be done on the Bluetooth-compatible device. Refer to the instruction manual supplied with the
Bluetooth-compatible device for details on the start-up operations.
The mic and speaker of the Bluetooth-compatible device can be used when the connection process completes. In
this case, a Bluetooth Connect Tone (2 beeps) sounds from the transceiver, the "
appears for 1 sec. Also, the LED turns Off.
Note
The connection process continues even if a Voice Call or Data Call is received during the connection process.
0
Mode Reset Timer is extended during the connection process.
0

Registering and Connecting Using PF Keys (Define Bluetooth Device)

Pairing can be started for a Bluetooth-compatible device having an address configured in Define Bluetooth Device.
Operating the transceiver
1
Press the Bluetooth Connect / Disconnect
exist.
A Key Beep A (1 beep) sounds from the transceiver and pairing starts. An LED flashes blue during pairing.
Common FUNC (K, F)/Ver 2.20
12 : 34
A
M
Find Device 1
Connecting
12 : 34 A
M
Z o n e 1
C h a n n e l 1
C o n n e c t e d
Me nu Z on e+
key when a connected Bluetooth-compatible device does not
12 : 34 A
M
Z o n e 1
C h a n n e l 1
C o n n e c t i n g
Me nu Z on e+
" icon blinks, and "Connected"
CONTENTS INDEX
186