Creating A Dedicated Mobile Relay Station Cable - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.18 Relaying the Received Signal (Mobile Relay Station)

Creating a Dedicated Mobile Relay Station Cable

For connecting RF Deck 1 and RF Deck 2 by COM port 2, a D-sub 25-pin cable dedicated for Mobile Relay Station is created.
Required components
0 D-sub 25-pin connector (male) (soldering type)
Comparable product to HDBB-25P(05) (Hirose)
A quantity of 2
0
Flat cable
Comparable product to 28AWG
7 core wires
Approximate length of 40 cm
0
Heat shrink tubing
SUMITUBE 1.5 φ
Appropriate quantity
Procedure to create a D-sub 25-pin cable
1
Cut the flat cable to the required length (approximately 40 cm), strip about 2 mm from the ends the cable,
and prepare the ends with solder.
Common FUNC (K, F)/Ver 2.20
Figure 16-89 Processing of the Flat Cable
CONTENTS INDEX
330