Resetting The Recognition Of Microsd Card (Eject Sd Card) - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.17 microSD

Resetting the Recognition of microSD Card (Eject SD Card)

Eject SD Card Mode is used to reset the recognition of microSD card from an RF Deck and KCH-20R. A microSD card for
which the recognition is reset varies depending on the configuration in SD Card Selection (RF Deck, Control Head 1, Control
Head 2).
0
RF Deck
By pressing the Eject SD Card key, or by pressing the Menu key to enter Menu Mode and then executing "Eject SD Card
Mode", the recognition of the microSD card inserted in the Selected RF Deck can be reset.
0
Control Head 1/ Control Head 2
By pressing the Eject SD Card key, or by pressing the Menu key to enter Menu Mode and then executing "Eject SD Card
Mode", the recognition of the microSD card inserted in Control Head 1/ Control Head 2 (KCH-20R) can be reset.
Recording Received Audio Automatically (Auto Recording)
If each RF Deck transmits or receives, the audio is recorded to a microSD card or internal memory. The recording behavior
varies according to the configuration in SD Card Selection (RF Deck, Control Head 1, Control Head 2).
0
RF Deck
The recording behavior is executed by each RF Deck. The method of starting recording can also be configured for each
RF Deck.
If each RF Deck transmits or receives, the audio is recorded to a microSD card inserted in each RF Deck. If no microSD
card is inserted, the audio is recorded to the internal memory of each RF Deck.
0
Control Head 1/ Control Head 2
The recording behavior is executed by the Selected RF Deck. The method of starting recording is common to all RF
Decks.
If a microSD card is inserted in Control Head 1/ Control Head 2 (KCH-20R), the audio is recorded to a microSD card when
the Selected RF Deck transmits and receives. No recording is done by the Unselected RF Deck.
If no microSD card is inserted in Control Head 1/ Control Head 2 (KCH-20R), the audio is recorded to the internal memory
of the Selected RF Deck when the Selected RF Deck transmits and receives. No recording is done by the Unselected RF
Deck.
Recording ends if the Selected RF Deck is switched during recording. In this case, the Gap timer is not activated, and
recording is not done during the silence time.
Note
Recording is not done during formatting, deleting an audio file or recognizing a microSD card. Also, even after these
0
statuses are reset, a communication that has already started is not recorded.
After the configuration data is written, the configuration values in Internal Memory of Maximum Recording Length
0
before and after writing are compared for each RF Deck. If the values differ, the audio data recorded in the internal memory
of the RF Deck is deleted while "SELF TESTING" appears on the display.
If the configuration data with Audio/GPS Data Erase (Internal Memory) enabled is written, the audio data recorded in
0
the internal memory of all RF Decks is deleted while "SELF TESTING" appears on the display.
If a microSD card is ejected during recording, the audio data file during recording may not be saved correctly.
0
Common FUNC (K, F)/Ver 2.20
CONTENTS INDEX
318