Temporarily Reducing The Volume Level - Kenwood NX-5000 Series Common Function Reference

6 SOUND
6.4 Functions Related to the Volume Configuration
Changing the Tone Volume Level with a Single Touch (Selectable Tone Level)
Selectable Tone Level is the function to enable the Tone Volume to be changed by using a PF key.
Pressing the Fixed Volume key causes the volume level to be changed to Low Volume Level (Fixed Volume) or High
Volume Level (Fixed Volume)configured using KPG-D1/ D1N.
Or, pressing the Menu key to enter Menu Mode and then selecting "Fixed Volume" enables Tone Volume to be changed.
(Refer to Using Menu Mode.)
Operating the transceiver
1
Press the Fixed Volume
The tone volume switches in the following order: Low Volume Level (Fixed Volume) N High Volume Level (Fixed
Volume) N Off N Low Volume Level (Fixed Volume) ...
Configuration using KPG-D1/ D1N
0
Configuring Low Volume Level (Fixed Volume) and High Volume Level (Fixed Volume) (
> Optional Features > Optional Features 1 > Sound > Tone Volume)
0
Assigning functions to the PF keys on the transceiver (
Temporarily Reducing the Volume Level of the Speaker (Speaker Attenuation)
Speaker Attenuation is the function to temporarily reduce the volume levels of the speaker microphone, the speaker of the
transceiver, and the Bluetooth speaker.
This function can be used while the transceiver is in use in a quiet place. This function is normally activated and the
transceiver can pause Speaker Attenuation only if making an important call, such as an emergency call.
Pressing the Speaker Attenuation key toggles Speaker Attenuation between activated and deactivated.
Operating the transceiver
0
Activating Speaker Attenuation
1
Press the Speaker Attenuation
Speaker Attenuation is activated and then the volume level will be decreased by approximately 10 dB.
0
Deactivating Speaker Attenuation
1
Press the Speaker Attenuation
Speaker Attenuation is deactivated and then the volume level will restore to the previous level.
Note
The status of Speaker Attenuation is retained even if the speaker microphone is removed while Speaker Attenuation is
activated.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the speaker microphone (
Common FUNC (K, F)/Ver 2.20
key.
key while the Speaker Attenuation is deactivated.
key while the Speaker Attenuation is activated.
Transceiver Settings > Key Assignment)
Transceiver Settings > Key Assignment)
CONTENTS
Transceiver Settings
122
INDEX