Electrical Safety - Huawei NetCol8000-E220 User Manual

Modular indirect evaporative cooling system
Hide thumbs Also See for NetCol8000-E220:
Table of Contents

Advertisement

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
Personnel Requirements
Personnel who will install, operate, and maintain Huawei equipment must receive thorough
training, understand all necessary safety precautions, and be able to correctly perform all
operations.
Grounding Requirements
Personal Safety
Equipment Safety

1.2 Electrical Safety

High Voltage
Issue 02 (2019-10-10)
Only trained and qualified personnel are allowed to install, operate, and maintain the
equipment.
Only personnel certified or authorized by Huawei are allowed to replace or modify the
equipment or components (including software).
Any fault or error that might cause safety problems must be reported immediately to a
supervisor.
When installing a device, always install the ground cable first. When uninstalling a
device, disconnect it at the very end.
Do not damage the ground conductor.
Do not operate the device without a properly installed ground conductor.
The device must be connected permanently to the protection ground.
Do not perform operations on the equipment or cables during thunderstorms.
Keep unauthorized personnel away from the equipment.
When operating the equipment, wear insulation shoes and gloves and take measures to
protect your eyes. Remove conductive objects such as jewelry and watches to avoid
electric shocks or burns.
Ensure that tools are insulated.
Do not block any ventilation opening when the equipment is in operation.
After the installation is complete, remove packing materials from the equipment area.
Never use water to clean the electrical components in the interior and exterior of the
cabinet.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
2

Advertisement

Table of Contents
loading

Table of Contents