Unpacking; Remove The Packaging; Checking Fittings - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual

3.5 Unpacking

3.5.1 Remove the Packaging

Procedure
Step 1 Inspect the outer packaging for signs of damage. If any damage is found, contact the shipping
company immediately.
Step 2 Remove the packaging.
Figure 3-11 Removing the packaging
----End

3.5.2 Checking Fittings

Check the following items after unpacking the product:


Issue 02 (2019-10-10)
Check whether the cabinet exterior is intact, and free of collision and scratch. If any
damage is found, notify the carrier immediately.
Check the types and quantity of fittings against the fitting list. If there is any problem,
contact Huawei technical support.
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
32