Webui; Preparations And Webui Login - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual

5.1 Preparations and WebUI Login

Prerequisites


Procedure
Step 1 Connect a network cable between the PC network port and the FE port (protected by a
security mechanism) on smart cooling product.
Step 2 On the home screen, choose Settings > Comm Settings > IP Settings. Change IP assigning
mode to Manual, and set the IP address, subnet mask and default gateway.
Step 3 Configure the PC IP address and the smart cooling product IP address in the same network
segment.
If the smart cooling product IP address is 192.168.0.10, subnet mask is 255.255.255.0, and
default gateway is 192.168.0.1, set the PC IP address to 192.168.0.11, subnet mask to
255.255.255.0, and default gateway to 192.168.0.1.
Step 4 Set LAN parameters.
1.
2.
Issue 02 (2019-10-10)
Operating system: Windows 7 and later versions
Browser: IE9 and later versions, Firefox and later versions, Chrome and later versions.
IE browser is used as an example.
 If the smart cooling product connects to a LAN and a proxy server has been selected, perform
4.3 and Step 4.4.

If the smart cooling product connects to the Internet, and the PC in a LAN accesses the Internet over
a proxy server, do not perform
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
Copyright © Huawei Technologies Co., Ltd.
Step 4.3 and Step 4.4. Otherwise, you will fail to access the ECC800.

5 WebUI

5
WebUI
Step
99