Huawei NetCol8000-E220 User Manual page 99

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
No.
6
----End
Follow-up Procedure
After you have completed the settings, perform the following checks to confirm whether the
teamwork control is available:
1.
2.
3.
4.
Issue 02 (2019-10-10)
Parameters Note
as shown in
Ground
Red indicates that a critical alarm is generated,
color: red,
bright gray
as shown in
Bright gray indicates that the device is operating without any
critical alarms,
as shown in
If teamwork succeeds, the teamwork icon is green. If teamwork fails, the teamwork icon is red. If
teamwork mode is disabled, the teamwork icon is gray.
Check whether the device number on the topology is the same as the actual device
number.
− If yes, go to 2.
− If no, check the cable connection and the settings of teamwork control parameters.
Check whether the number of active devices on the topology is the same as the actual
device number.
− If yes, go to 3.
− If no, check the cable connection and the settings of teamwork control parameters.
Check whether the number of standby devices on the topology is the same as the actual
device number.
− If yes, go to 4.
− If no, check the cable connection and the settings of teamwork control parameters.
Check whether the number of online devices on the topology is the same as the actual
device number.
− If yes, the check is complete.
− If no, check the cable connection and the settings of teamwork control parameters.
Copyright © Huawei Technologies Co., Ltd.
4 Power-on and Commissioning
.
.
.
91