NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
Procedure
Step 1 On the home screen, choose Maint > Sensor Calibration.
Step 2 Fill the calibration value based on the measured error.
----End
7.1.13 How to Modify a Password
Prerequisites
Procedure
Step 1 On the home screen, choose Settings > User Settings to enter the User Settings screen, as
shown in
Figure 7-5 User Settings
Step 2 Tap Password to enter the password changing screen, as shown in
Issue 02 (2019-10-10)
To modify a password, log in as the admin user or operator user.
You can only modify the password of the current user.
Figure
7-5.
It is recommended that the password should contain at least two types of characters.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
Figure
7-6.
181