NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
Procedure
Step 1 Tap Maint > USB Operations > Export to enter the Select Path screen, as shown in
7-9.
Figure 7-9 Select path
Step 2 Tap the file where the user saves current data in the Select Path dialog box and tap Next.
Then tap Yes in the displayed dialog box.
Step 3 After the data is successfully exported,
Figure 7-10 Screen showing that data export has succeeded
Step 4 Click Maint > USB Operations > Remove USB to remove the USB flash drive in safe
mode.
----End
7.1.18 How to Export and Import a Configuration file
Context
You are advised to use the FAT32 USB flash drive with a capacity no greater than 64 GB.
Format the non-FAT32 USB flash drives into FAT32 ones before using them.
Issue 02 (2019-10-10)
If the USB flash drive is not properly connected, the system will display No USB device found.
during operations about the USB flash drive.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-10
is displayed. Click Finish.
7 FAQ
Figure
186