Optional) Setting Wifi Parameters - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
Before using a USB flash drive, ensure that its data has been scanned by antivirus software
and is secure.
Figure 4-16 Exporting the MIB file successfully

4.4.3 (Optional) Setting WIFI Parameters

Prerequisites
After connecting the WIFI module of the USB interface to the USB port of the smart cooling
product display, WIFI Settings is enable to be set.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > WIFI Settings.
Step 2 Set the parameters by referring to
Table 4-7 WiFi settings
Parameter
WiFi SSID
WiFi Password
Enable WiFi
Step 3 Tap Submit.
----End
Issue 02 (2019-10-10)
Table
Setting Method
Set WiFi SSID based on the actual configuration; WiFi SSID is the
name used for the WiFi hotspot over which a mobile phone can
connect to the smart cooling product.
Enter the WiFi password when you use a mobile phone to connect
to the WiFi. When you enable the WiFi function for the first time,
you need to set a password (the WiFi has no default password).
Enable the WiFi function. The default status is Disable.
Copyright © Huawei Technologies Co., Ltd.
4 Power-on and Commissioning
4-7.
85