Epson C12 Series Manipulator Manual page 35

2.6.2 Option
C12 series have the following options.
For details of options, refer to Setup& Operation: 6. Options.
User wires and pneumatic tube
Adjustable mechanical stop
Tool adapter
Camera plate unit
Brake release box *1
C12 Rev.3
Standard user connector kit
Fittings for customer use
Adjustable mechanical stop
C8 ISO flange (J6)
Camera mounting tool (common for C3, C4 and C8 series)
For EU (power supply voltage 200 V, short connector included)
For US/JP(power supply voltage 100 V, short connector included)
Short connector for the brake release box
*1: When using the brake release box with C12 series, it is necessary to connect the
short connector to the M/C power cable or connect the M/C power cable with the
Controller. (The brake release box can be used while the Controller is de-
energized state.)
If you are using C3, C4, or C8 series Manipulator and already have the brake
release box, you can use it by connecting the M/C cable with the Controller, or
purchasing the short connector separately and connecting it to the M/C power
cable.
Setup & Operation 2. Specifications
: Standard D-sub 15-pin × 2
: ø6, straight × 2
ø6, elbow × 2
: J1
J2
J3
21