Access Target Cpu Setting - Mitsubishi Electric MELSEC Q Series User Manual

4 SET-UP AND PROCEDURE BEFORE OPERATION

4.6.7 Access target CPU setting

Item
Item
CPU name
PLC series
Multiple CPU specification
Other station specification
Network communication route,
Different network communication
route
Edit
Delete
4 - 52
[Setting Purpose]
Sets the connection path to the access target CPU.
When performing device monitor, tag setting, etc., specify the CPU name set in
this setting.
[Start Procedure]
[Administrative menu]
access target CPU setting No. to be edited, and click on Edit .
(Refer to (2))
(1) Access target CPU setting
Make access target CPU setting.
Up to 64 access target CPUs can be set.
At shipment, the control CPU is registered for the Web server module as the
access target CPU setting No. 1.
The registration of the control CPU as the access target CPU No. 1 is fixed and
only the CPU name is changeable.
[Setting screen]
[Setting item]
Selects the access target CPU No. to be edited or deleted.
Displays the CPU name.
Displays the programmable controller series of the access target CPU.
Displays the CPU No. when the access target CPU is in a multiple CPU system.
Displays whether other station is specified or not.
Displays the network type, network No., start I/O address and station No. to be
accessed when specifying other station.
Edits the selected access target CPU.
Deletes the selected access target CPU.
"Access target CPU setting" (Refer to (1))
Description
MELSEC-Q
Select the
"Edit Screen"
4 - 52