Mitsubishi Electric MELSEC Q Series User Manual page 262

6 FUNCTIONS
6 - 39
(a) Component name (within 16 characters)
1) Set the component name.
2) Refer to Appendix 4 (5) for the characters applicable to the component
name.
(b) CPU name
1) Set the access target CPU.
2) Selects the CPU name set in the access target CPU setting.
(Refer to Section 4.6.7 for the access target CPU setting.)
3) The CPU name drop-down list displays the setting No. and CPU
names of the access target CPU setting.
(Example) 01: Control CPU
4) By default, the host CPU of the Web server module is set as the
access target CPU setting No. 1.
5) When "Sampling: Execute at high speed" is selected in the tag setting,
the access target CPU setting No. 1 (control CPU) must be set. (Fixed)
(c) Data type
1) Select the data type of the collected data (device data).
Single word : Set for data of single word.
Double word
Real number : Set for data of real number.
Bit
String
2) For a word device, Single word, Double word, Real number or String
can be selected.
For a bit device, Bit can be selected.
3) When "Bit" has been selected, data in 1-bit unit (0/1) is handled.
4) When "String" has been selected, set the number of characters. (1 to
32 bytes)
When the data type is "String", the device value is as described below.
 When the device value is not ASCII code, it is replaced by a "."
(period: 2E
Web server module cannot access Unicode character data in RCPU.
 When the device value is a ",", (comma: 2C
(period: 2E
 When the device value is a termination character (NULL code: 00
the subsequent character data are ignored. (The character string is
regarded as completed.)
(d) Device
1) Specify the device type and actual device number.
2) Device specification by qualification (indexing, digit specification, bit
specification to word device) is not available.
3) Refer to Appendix 2 for the accessible devices.
4) When "Sampling: Execute at high speed" is selected in the tag setting,
set the device within a total of 96 points.
: Set for data of double word.
: Set for bit data (Enabled for bit device)
: Set for character string. ( )
).
H
). (To differentiate it from the delimiter of the CSV file)
H
MELSEC-Q
), it is replaced by a "."
H
H
6 - 39
),