E-Mail Function; E-Mail Transmission By Programmable Controller Cpu - Mitsubishi Electric MELSEC Q Series User Manual

6 FUNCTIONS

6.6 E-mail Function

6.6.1 E-mail function
1) Makes required setting for e-mail in
control data of dedicated instruction.
Programmable controller CPU
[ZP.WMSEND ]
Programmable
controller CPU
6 - 71
This section explains the e-mail function.
The e-mail function sends the data (tag data, logging data, user data file), which were
collected by the Web server module from the programmable controller CPUs, to a
remote external device by e-mail.
There are the following four methods for sending e-mail with this function.

(1) E-mail transmission by programmable controller CPU

E-mails are sent by the dedicated instruction (WMSEND) in a sequence program.
Any subject, any main text, and an attached tag data/logging data/user data file
can be sent.
Web server module
Subject
(ASCII data)
Main text
(ASCII data)
Tag/Logging No.
User data file name
(2) E-mail transmission by event monitor function
E-mails are sent by the Web server module according to the event setting of the
Web browser.
An e-mail is sent when an event (CPU event, tag event, time/interval event) occurs.
A fixed subject, any main text, and an attached tag data or logging data file can
be sent.
1) Performs monitoring
according to event
setting.
Web server module
CPU monitor
Tag monitor
Time/
2002/07/01 09:00:00
interval monitor
2) According to the tag
setting, collects device
data in tag unit.
Tag data
Logging data
User data file (Binary/CSV data)
Event
conditions (ASCII data)
satisfied
Tag data Attached file
Logging data
Subject
(ASCII data)
Main text
(ASCII data)
Attached file
2) Sends an e-mail by
dedicated instruction
(WMSEND).
Subject
Main text
(ASCII data)
(CSV data)
3) When event conditions
are satisfied, an e-mail
will be sent.
MELSEC-Q
Mail server
Mail server
6 - 71