Csv Export/Import Function - Mitsubishi Electric MELSEC Q Series User Manual
Programmabale web server module
Hide thumbs
Also See for MELSEC Q Series:
- User manual (834 pages) ,
- Reference manual (674 pages) ,
- Programming manual (624 pages)
Table of Contents
Advertisement
6 FUNCTIONS
6.10.3 CSV export/import function
Web server module
6 - 119
The setting data (various settings of the administrative menu) of the Web server
module can be stored into a CSV file and edited using spreadsheet software, etc. on
the personal computer.
The edited CSV file can be read to the Web server module to change the setting data.
This function is convenient for editing a screen with many settings, e.g. the component
setting.
POINT
The setting data of the Web server module can be set in the Web browser. (Refer
to Section 4.6.)
When making setting from the Web browser, it is not necessary to use this function.
(1) CSV export/import function
(a)
CSV export function
Stores the setting data of the Web server module into standard ROM or
CompactFlash card as a CSV file on the data management screen.
(b)
CSV import function
Reads the CSV file of the standard ROM or CompactFlash card to the Web
server module as the setting data on the data management screen.
Hereafter, the CSV file created with the CSV export function is referred to as
"setting data file".
Export
Setting data file
(.CSV)
Import
(2) Precautions for use of the CSV export/CSV import function
(a)
When editing the setting data file, make sure that the setting data file was
exported by CSV export function.
The user should not create a new setting data file.
(b)
When executing the CSV import of the setting data file, do as in the
procedure given in (3).
(c)
While CSV export/import is being executed on Data management, do not
switch power from ON to OFF, reset the CPU module, or perform operation
in the administrative menu.
Performing any of the above operations can cause the setting data file to
be corrupted or erased.
(d)
To avoid the possibility of illegal data acquirement from the setting data file
that contains the password and other data, delete the setting data file from
the standard ROM or CompactFlash card after the setting is completed.
Editing
MELSEC-Q
Spreadsheet software
6 - 119
Advertisement
Table of Contents
