APPENDICES
App - 9
13 When the access target CPU is Q12DCCPU-V, the access is not possible.
14 Newly added devices in RCPU cannot be accessed.
15 When the access target CPU is RCPU, only the device within the range of
U3En\G0 to 9999 can be accessed.
16 When the access target CPU is RCPU, the device within the range that can be set
for QCPU (Q mode) or C Controller module can be accessed. For the settable
device range, refer to the following manuals.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
MELSEC-Q C Controller Module User's Manual
MELSEC-Q
App - 9