Mitsubishi Electric MELSEC Q Series User Manual page 158

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 34
(1) Network type setting
Set the connection method of the Web server module to the network.
(a) Select the connection method of the Web server module to the network.
Item
Connecting through LAN
or the router.
Dial-up to the network.
(Modem, ADSL)
(b) When connecting to the Internet, make the setting necessary for the
Internet connection in the dial-up setting. (Refer to Section 4.6.4.)
(2) IP address setting
Set the IP address for the Web server module.
(a) Select the IP address obtaining method.
Item
Obtain an IP address
automatically.
Use the following IP
address.
(b) When "Use the following IP address." has been selected, set the IP
address, subnet mask and default gateway in decimal number.
1) IP address
Set the IP address for the Web server module.
(Example) 192.168.3.3
2) Subnet mask
Make setting when using a subnet mask.
The devices on the same network must have a common subnet mask.
(Example) 255.255.255.0
3) Default gateway
 Set the default gateway.
 One gateway can be registered for a Web server module.
(c) Set the IP address, subnet mask and default gateway after consulting the
network administrator (person in charge of network planning, IP address
management, etc.).
(3) DNS server setting
Set the IP address for the DNS server.
(a) Select the method of obtaining the IP address of the DNS server.
Item
Obtain a DNS server
address automatically.
Use the following DNS
server address.
Select this item when connecting through LAN or the router.
Select this item in the case of Internet connection using dial-up
connection.
Select this item when obtaining the IP address automatically.
Select this item when using the specified IP address.
Select this item when obtaining the IP address of the DNS server
automatically.
Select this item when using the specified DNS server IP address.
MELSEC-Q
Description
Description
Description
4 - 34